O2 Innovations CTA-08 - Manual (Page 12)

Your O2-B™ CTA-08 Portable Oxygen Bar contains no user-serviceable parts. If you believe your unit is not
working properly, BEFORE YOU RETURN IT TO THE DEALER WHERE YOU PURCHASED IT OR TO
O2-B™, please take a few moments to check for these possible causes:
TROUBLESHOOTING
O2-B
™
CTA-08 Portable Oxygen Bar
SPECIFICATIONS
PROBLEM ACTION
Unit does not turn on. 1. Check power sources and connections.
2. Check that your wall outlet is live.
3. Check that power cord is not damaged.
Motor runs, but no oxygen is emitted. 1. Check all hose connections.
2. Check for damaged hoses or hose kinks.
3. Check that filters are clean.
Limited oxygen flow 1. Check for damaged hoses or hose kinks.
2. Check voltage of wall outlet.
3. Check that filters are clean.
Emitted oxygen produces an 1. Clean hoses. (Refer to page 10)
unpleasant odor 2. Clean headset. (Refer to page 10)
3. Replace mouthpiece filter.
(Refer to page 10)
11
Weight: (Compressor only) 15 pound (6.8 kg)
Dimensions: (Compressor only) (L) 6.4” x (W) 11.9” x (H) 16.3”
(162 x 303 x 415 mm)
Electrical Requirements: A/C 115V~60Hz
Power Wattage:
100 watts under normal load
Oxygen Concentration:
40% (+/- 2%)
Oxygen Output Capacity: 3 LPM (liters per minute)
Ambient Operation
Temperature Range:
50° to 95°F (10° to 35°C)
Humidity Range: 30% to 75%
Transport/Storage
Ambient Temperature:
-13° to 158°F (-25° to 70°C)
Humidity: 10% to 90%