Olympus Camcorder - Manual (Page 13)

Olympus Digital Vision User’s Guide Page 12
Using the Flash
There are four flash modes available on the Olympus Digital Camera, to compensate
for different lighting conditions.
To change the flash mode:
❒ Select the Flash button.
Each press of the button cycles to the next mode. The current flash mode setting is
indicated in the display to the left of the picture counter. The available modes are:
Red eye reduction - reduces the possibility of people appearing to
have red eyes in the finished photograph. The camera uses the
flash to do this—it flashes once to adjust the subject’s eyes to the
light, then again to take the picture.
On - the flash will activate every time a picture is taken.
Off - the flash will not activate.
[No icon] Automatic - the flash will activate when it senses that there is not
enough light to take a picture.
About the Camera
You can view camera and software version information on the screen. This information
is used when you update your software or when you are working with technical support.
Note: To access these camera options through your computer, the camera must be
connected to your computer via the connection cable.