Olympus Camcorder - Manual (Page 15)

Olympus Digital Vision User’s Guide Page 14
Configuring the Camera
You can change the communications port, the data transmission speed, and the date
and time stored in the camera. You can also define the time period for camera auto-
shutoff. The system attempts to detect the best communications settings for your
system, but you may change the provided defaults if necessary.
Note: To access these options, the camera must be connected to your computer via
the connection cable.
To change the configuration settings:
1. Select the Configure tab in the Olympus Digital Vision window.
The Configure page displays.
2. Change the settings as necessary:
❒ Click the up or down arrows to increase or decrease the displayed value.
OR
❒ Highlight the entry to be changed and type in the correct information.
Setting Description
Port The communications port where the camera is attached to the
computer.
Speed The maximum data transfer speed the port can handle.
Set Date
and Time When the camera is connected to your computer, the system tries to
verify the camera’s date and time. If the date/time in the camera is not
set or is incorrect, the system prompts you to verify the date/time.
When setting the time, also select AM or PM.