Listening to am/fm radio – Onkyo TX-NR717 User Manual
Page 31
Turning On & Basic Operations
En-31
■
Creating a shared folder
Playing music files on a shared folder
In order to enjoy Home Media, you must first create a
shared folder on your computer.
Using the Tuner
With the built-in tuner you can enjoy AM and FM radio
stations. You can store your favorite stations as presets for
quick selection.
You can also change the frequency steps (
).
1
Right-click the folder that you want to share.
2
Select “Properties”.
3
On the “Sharing” tab, select “Advanced Sharing”.
4
Check the check box of “Share this folder” and then
click “OK”.
5
Under “Network File and Folder Sharing”, select
“Share”.
6
Select and add “Everyone” from the pull-down
menu and then click “Share”.
Tip
• With this setting, everyone is allowed to access the folder.
If you want to assign a user name and password to the
folder, make the corresponding settings for “Permissions”
in “Advanced Sharing” of the “Sharing” tab.
• Verify that “Workgroup” is properly set.
Note
• When using NAS (Network Attached Storage), refer to the
instruction manual provided with your NAS unit.
1
On the remote controller, press
RECEIVER
followed by
NET.
The network service screen appears. The NET
indicator lights. If it flashes, confirm the network
connection.
Tip
• The same operation can be done by selecting “Network
Service” in the Home menu.
2
Use / /
/
to select “Home Media”, and press
ENTER.
3
Use / to select a server, and then press
ENTER.
Tip
• The server name of your computer can be viewed on the
computer properties screen.
4
Use / to select the desired shared folder and then
press
ENTER.
5
When asked for a user name and password, enter
the necessary login information.
Tip
• The login information will be remembered for the next time
you log in.
• The login information is that of the user account set when
creating a shared folder.
6
Use / to select a music file and then press
ENTER
or
.
The playback of the selected file starts.
Listening to AM/FM Radio
This section describes the procedure of using the
buttons on the front panel, unless otherwise specified.
1
Press
TUNER to select either “AM” or “FM”.
In this example, FM has been selected.
(Actual display depends on the country.)
Band
Frequency