Olympus DS-320 - Manual (Page 28)

28
Using the V
ariable Control V
oice Actuator
(VCV
A)/
Dictation Mode
ERASE SP DICT
INDEX/
FOLDER
MENU
/VOL
Dictation Mode
Simply pressing the SP DICT button sets up
the recorder for dictating or for recording
messages to be transferred to a PC for
speech-to-text conversion using voice
recognition software.
Dictation mode settings
Recording mode: SP
Microphone sensitivity: DICT
Alarm:
OFF
To change settings from DICT mode, see the
following pages:
To change recording mode:
See P.25.
To change microphone sensitivity: See P.26.
To change alarm setting:
See P.31.
.....................................................................
Notes
• Place the built-in microphone close to the speaker’s
mouth (2 to 4 inches).
• Use of an optional ME12 noise-canceling
microphone is recommended for recording with
minimum ambient noise effects.
SP DICT
INDEX/
FOLDER
ERASE
MENU
/VOL
Adjusting the VCVA start/stop
actuation level
Move the MENU/VOL switch up or down while
recording to adjust the VCVA start/stop
actuation level (1 to 30). The higher the level,
the more sensitive the VCVA is.
Note
The VCVA start/stop actuation level also varies
depending on the selected microphone sensitivity
mode. For information about microphone sensitivity,
see page 26.
Using the Variable Control Voice
Actuator (VCVA)