Olympus DS-320 - Manual (Page 57)

57
Executing Voice Recognition
Start voice recognition as described below.
Click the [Start Voice Recognition] icon .
The voice recognition software window
appears and voice recognition starts.
• For more details on the functions of IBM
ViaVoice (such as correction of converted
characters), refer to the ViaVoice’s online help.
V
oice Recognition
1 Select the folder.
From the DSS Player main window,
select the folder containing the voice
file you want to process with voice
recognition.
2 Select the voice file.
In the [Voice Files] list box, select the
desired voice file.
3 Start of voice recognition.
Notes on Recording for Voice Recognition
When recording voices for use in voice recognition, set up your DSS recorder as follows.
– Set the microphone sensitivity to “DICT”.
– Set the recording mode to “SP”.
– Set the Variable Control Voice Actuator (VCVA) to “OFF”.
– Only record voices that have already been registered in the voice recognition software.
– Record in a relatively quiet environment.
– Speak within 2 to 4 inches of the built-in microphone of the recorder.
– Speak continuously.
• Voice files recorded in the “LP” recording mode cannot be processed by voice recognition.
• Following situations are not suitable for voice recognition because the accuracy may be very low:
– A conference or meeting where the voices of many people have been recorded.
– Seminar or lecture in which ambient noise tends to be recorded.
1 3 2