Oki B930d User Manual
Page 98
B930n User’s Guide> 92
NOTE
>
If several parameters are specified in one "lpr" command,
data may not be printed correctly.
>
The system default is used if no parameter is specified.
>
If the print data specifies 2 sided or 1 sided printing, the
specification by the data becomes valid and overrides that
by -C option.
Specifying Paper Size and 2 sided Printing
Select a paper size and a binding type. The following parameters can
be specified:
NOTE
>
If several parameters are specified in one "lpr" command,
data may not be printed correctly.
TUMBLE/tumble
2 sided printing as follows:
SIMP/simp
1 sided printing
PARAMETER
DESCRIPTION
A4D/a4d
2 sided printing on A4 paper and long-
side binding
A4T/a4t
2 sided printing on A4 paper and short-
side binding
A5D/a5d
2 sided printing on A5 paper and long-
side binding
A5T/a5t
2 sided printing on A5 paper and short-
side binding
B5D/b5d
2 sided printing on 85 paper and long-
side binding
B5T/b5t
2 sided printing on B5 paper and short-
side binding
PARAMETER
DESCRIPTION