Optiview Enterprise Series - Manual (Page 3)

- 2 -
I. Features and Functions of the Digital Video Server
1. Front Panel
1 2 3 4
1.1
TX/RX LED indicator – indicates transmit/receive signals
1.2 Link Led indicator – indicates Ethernet link/connection with the network
1.3 PWR indicator – indicates power ON/OFF
1.4 Reset switch – clears the network information such as IP, Gateway
etc…(available only on older models)
2. Back Panel
1 2 3 4 5 6 7 8 9 10
2.1. Power Supply input
– 5 or 12 Volts DC input (depending on model)
2.2. UTP – Ethernet port for the network connection
2.3. Data OUT – alarm or sensor signal output port
2.4. Data IN – alarm or sensor signal input port
2.5. RS485 – RS485 communication signal port (Use orange and
orange/white from a CAT5 cable for PTZ cameras)
2.6. RS232 – RS232 communication signal port. Also used to configure IP
information for the device
2.7. Video IN – video input port
2.8. Audio IN – audio input port, one per video input channel
2.9. LINE IN – optional audio input
2.10. LINE OUT – optional audio output