Optiview Enterprise Series - Manual (Page 9)

- 8 -
4.3
IP address and subnet mask information will now be active in the text box and
ready for editing. Change these two IP information (IP address and Subnet Mask)
based on your local network setup. Please consult your local IT staff or Internet
Service Provider as to what IP address information you are going to use for your
IP video server/camera.
5. Remote Connection to Digital Video Server via Internet Explorer
5.1 Connecting to the DVR via Web browser, Internet Explorer*
Once the IP information has been setup on the Video Server and the unit is physically
connected to the network. Open the IE on a PC and type in the local IP address on the
b
rowser’s address box to remotely connect to the video server. A local IP address
usually starts like 192.168.1.xxx or 10.0.0.xxxx.
* Note that this section (4.1) is only applicable locally, meaning accessing your DVR
within your local area network.
Default login name: admin
Password: 12345
Default port: 8000