Outback Power Systems OUTBACK TROOPER 359 - Manual (Page 15)

15
CE
Approval
Heat
Input
Burners
Injector
Size
Gas /
Pressure
Outback®
Trooper 0359
359BR128
7.87kW 2
1.04
(#41)
Butane/
28-
30mbar
Propane/
37mbar
Outback®
Hunter 0359
359BR128
11.8kW 3
Outback®
Ranger 0359
359BR128
15.75kW 4
Countries of Use:
I
3+(28-30/37)
BE, CY, CZ, EE, FR, GR, IE, IS, IT, LV, LT, LU, PT, SK,
ES, CH, GB
I
3B/P(30)
CY, CZ, DK, EE, FI, GR, LV, LT, LU, MT, NL, NO, SK, SI,
SE, TR
I
3B/P(50)
AT, DE, HU, SK, CH
I
3B/P(36)
PL
replace it with fresh sand. Failure to fill with
sufficient clean, dry, loose sand may result in a fat
fire or excessive flare up. This can severely
damage your barbecue and is not covered by the
warranty.
I5. Barbecue Body
Regularly remove excess grease or fat from the
barbecue body with a soft plastic or wooden
scraper. It is not necessary to remove all the
grease from the body. If you need to clean fully,
use hot soapy water and a cloth, or nylon-bristled
brush only. Remove cooking surfaces and burners
before full cleaning. Do not immerse the gas
controls or manifold in water. Check burner
operation after carefully refitting into body.
I6. Barbecue Hood
Use a non-abrasive cloth or pad and clean with
hot, soapy water. Do not use scouring pads or
powders as they can permanently damage the
finish.
I7. Trolley
Your trolley is manufactured using a hardwood
suited to outdoor use, provided it is treated with
Teak oil or similar after assembly and on a regular
basis thereafter. Hardwood will naturally weather
and change its appearance. It is quite natural for
small cracks to appear on the surface of the wood.
I8. Fixings
All screws and bolts, etc. should be checked and
tightened on a regular basis.
I9. Storage
Store your barbecue in a cool dry place. It must be
inspected on a regular basis as damp or
condensation can form which may result in
damage to the barbecue. It may be necessary to
dry the barbecue and the inside of the cover if
used. Mould can grow under these conditions and
should be cleaned and treated if required. Any rust
that is found that does not come into contact with
the food should be treated with a rust inhibitor and
painted with barbecue paint or a heat resistant
paint. Wooden parts may also need to be cleaned
and re oiled. Chrome plated warming racks etc.
should be coated with cooking oil. Wrap the
burners in aluminium foil to help prevent insects or
other debris from obstructing the burners.
The gas bottle must be always be disconnected
from the barbecue and stored in a well ventilated
area at least 1 metre away from any fixed ignition
source. Do not store inside residential
accommodation. Never store cylinders below
ground level (e.g. cellars). Do not let children
tamper with bottles.
J. Technical Specifications
Specifications are subject to change without prior notice.
In the unlikely event that you experience problems
with this barbeque, please contact:
Customer Service
Outback UK
Unit 2 Farleigh Hill
Tovil
Maidstone
Kent
ME15 6RG
Tel: 01622 671771
Fax: 01622 673101
e-mail: [email protected]