Oki 5750 - Manual (Page 53)

|
Feature Set Guide: English 43
Domain Name
User Function 91
This function is only used when setting up your fax machine
as a gateway for relay fax. This is also known as an off-ramp.
This setting is required when forwarding e-mail received by
SMTP to PSTN/ISDN.
Data is received only from the registered (programmed)
domain names.
Example
If you register network.com, only the e-mail from domain
network.com or its sub-domain will be received and
forwarded.
! Domain Name (User Function 91), is only used when
setting up your fax machine as a gateway for relay fax.
Domain Name Restrictions
·
Up to five (5) domain names may be registered.
·
Each domain name may be up to 64-characters long.
·
When a SMTP reception request is received, the e-mail
will be received only if the sender’s domain name
matches one of the registered domain names. If there is
no match, your fax machine assumes that the e-mail
cannot be received. Reception does not occur.
·
You may use Latin letters, numbers and symbols while
registering the domain name.
To enter symbols, use either one-touch key 20 or key “0”
of the numeric ten-key pad.
The symbols that can be used are:
! # & ’ ( ) * + , - . / : ; = ? · @ ? ” _ % ~
The “~” (tilde) symbol will appear on the display as “ -1 ”.
Both uppercase and lowercase letters can be used.
To change the case, press the CAPS key
(one-touch key 31).