Oki 8300E C6100 - Manual (Page 113)

OkiLAN 8300e Network User’s Guide, C6000n and C6100 Series
UNIX - 113
b. Activate the remote printer daemon.
# startsrc –s lpd
# mkitab ‘lpd:2:once:startsrc –s lpd’
3. Add the print queue using the smit command.
a. Activate the smit command and convert to the item
[Add print queue].
# smit mkrque
b. Select [remote] (the printer connected to the remote
host) from [Type of connection].
c. Select [Standard procedure] from Type of remote print.
d. Carry out the following settings in [Add a standard
remote print queue]. If the configuration differs from
below, configure according to environment.
Example: fr direct output port lp with print queue
okiprinte_lp and print server okiprinte
Queue to be added “printer_lp”
Host name of the
remote server “printer”
Queue name of the
remote server “lp”
Type of print spooler
of the remote server “BSD”
Description of printer name