Oki 8300E C6100 - Manual (Page 41)

OkiLAN 8300e Network User’s Guide, C6000n and C6100 Series
Configuration - 41
Option Menu
In the [Option] menu, the following item can be selected:
Item Function
Use TCP/IP
Protocol If this item is selected, AdminManager uses TCP/IP
protocol to search/configure network interface cards.
Use IPX/SPX
Protocol If this item is selected, AdminManager uses IPX/SPX
protocol to search/configure network interface cards.
Environment
Setup TCP/IP Tab
bmp50.jpg
Set broadcast addresses that are
used to search OKI network interface
cards using the TCP/IP protocol. If
[Use TCP/IP protocol] is unchecked,
the search will not be carried out
using TCP/IP.
NetWare Tab
bmp51.jpg
Set network addresses that are used
to search OKI network interface cards
via NetWare protocol. If there any
many NetWare file servers on your
network, specify the network address
to which the network card belongs. If
[Use NetWare protocol] is unchecked,
the search will not be carried out
using NetWare, but if [Auto Search] is
selected, AdminManager will search
all networks that AdminManager can
detect.
SNMP Tab Obtain the printer name via SNMP;
Set Community Name.
TimeOut Tab
bmp52.jpg
[Search Every]: Set response waiting
time from a network card in seconds.
[Time Out]: Set time out between
AdminManager and the network
interface card in seconds.
[Retry]: Set how many times the
retry will be carried out between
AdminManager and the network
interface card.