Oregon ATC Mini Action Camera ATCmini - Manual (Page 8)

ATCMini – 6
Operating Elements - Battery Installation & Charging
• Insert the provided battery to the battery
compartment. The metal contacts should face
toward the camera.
• Lever the latch to pull the battery out�
1� Connect the camera to a USB port through USB
cable� The status indicator will flash green and
red alternately and two beeps will be generated.
2� When charging is finished, the status indicator
turns green and a long beep will be generated.
Remove the camera from the USB port.
Make sure the battery is locked in place�
Recharge the battery when the status indicator
flashes green. The battery is low.
Please fully charge the battery before first use.
en.indd 6 8/9/2011 1:17:12