Optimus STA-3500 - Manual (Page 18)

18
Using the Remote Control
The remote control works up to a distance of about 23 feet, and within a 30-
degree angle on either side of the receiver. Point the control at the receiver’s
front panel and press the desired button(s).
Many buttons on the remote control work the same as buttons on the receiver’s
front panel. Use these buttons exactly as you would use the corresponding but-
tons on the receiver.
Receiver/Amplifier Section
FUNC Selects a program source (Tape 1/VCR, LD/DVD, CD, tuner,
or phono). Repeatedly press FUNC until the display shows
your desired program source. See Page 13.
– VOLUME + Adjusts the system’s volume. See Page 13.
RECEIVER POWER Turns the receiver on and off. See Page 13.
TAPE 2 MONITOR Switches the receiver to monitor the source connected to the
TAPE 2 MONITOR jacks. See Page 16.
S. BASS Press to enhance bass sound.
MUTING Silences the receiver. Press again to restore the sound to its
previous level. See Page 14.
STATION Press to move the next higher or lower station in memory.
CLASS Press to select the class of the station in memory
FM MONO Press to disable the FM stereo mode to improve reception of
weaker FM stations.
TUNING Manual Tuning: Press once to select the next higher or
lower frequency. Or, press and hold down to rapidly change
frequencies.
Automatic Tuning (FM Only): To search for the next lower
or higher station, release TUNING when the frequency
starts to change. The receiver searches up or down the band
until it finds a strong station.
FM/AM Press to switch between AM and FM bands.
BEST
DISC
DECK1
TAPE
RECEIVER CD TAPE
VOLUME POWER
CD
S.BASS TAPE2 MONITOR FUNC
TUNER
TUNING STATION
FM MONO FM/AM CLASS MUTING
STA-3500
STEREO RECEIVER
SYSTEM REMOTE OSR
ASMS
DECK2
Receive
Section