Optimus STA-3500 - Manual (Page 8)

8
Preparing Your Receiver
Connecting Program Sources You can connect up to five external program sources to your receiver.
Connecting a Turntable
Connect a turntable with a magnetic cartridge only. Some older turntables use a
ceramic-type cartridge that does not work with this system.
Connect the turntable’s left and right cables to the receiver’s left and right
PHONO jacks. Then connect the turntable’s ground wire to the receiver’s GND
terminal.
Connecting Cassette Deck(s)
You can connect cassette decks to the TAPE 1/VCR and the TAPE 2 MONITOR
jacks. Connect the cassette deck’s output jacks to the TAPE 1/VCR PLAY or
TAPE 2 MONITOR PLAY jacks, and connect the cassette deck’s input jacks to
TAPE 1/VCR REC (audio) or TAPE 2 MONITOR REC jacks.
Connecting a CD Player
To connect a CD player to the receiver, connect the CD player’s left and right
output jacks to the receiver’s
L and R CD IN jacks.
Connecting Another Audio Source
Connect the audio outputs of another audio source, such as the audio from a
laser disc player, TV, VCR, or CD player, to the
LD/DVD IN L and R jacks.
Note: Use shielded audio cables with
phono connectors for all audio connec-
tions.
Note: If you place the cassette deck
directly above, below, or to the left of the
receiver, the receiver could interfere with
the cassette deck’s operation. If possi-
ble, position the cassette deck to the
right of the receiver or locate it away
from the receiver.
PHONO
TAPE2
MONITOR CD
LD
/DVD
TAPE 1
/VCR CONTROL
GND
REC PLAY
L
R
L
R
IN IN IN
OUT
REC PLAY
L
R
REC PLAY
LINE
REC PLAY
INPUT OUTPUT
Cassette Deck Turntable
OUT PUT
L
R
CD
CD Player Cassette Deck
L
R
REC PLAY
LINE
REC PLAY
INPUT OUTPUT
LD/DVD Player
OUT PUT
L
R
R
L
L
R
L R
R L
R L R L
R L
R L R L
R
L
L R L
R
R
L