Olympus P-400 - Manual (Page 7)

2
US
WARNING
■ If anything strange occurs with the printer, unplug the power cord.
If the printer emits smoke, strange smells, or strange sounds, turn off and unplug the printer
to prevent fire or electric shock. Then contact your dealer.
■ Should any liquid or foreign object fall into the printer, unplug the power cord.
Do not allow any liquids, metals, or inflammable objects to get into the printer through the
vent. This may cause fire or electric shock. Turn off and unplug the printer, and then contact
your dealer.
■ If the printer cabinet is damaged, unplug the power cord.
Using the printer when the cabinet is damaged may cause fire or electric shock. Turn off and
unplug the printer, and then contact your dealer.
■ If the power cord is damaged, unplug it.
A damaged power cord may result in fire or electric shock. Turn the printer off and unplug the
power cord while being careful not to touch the wires in the cord. Then contact your dealer.
■ Do not damage the power cord.
A damaged power cord may result in fire or electric shock.
To prevent the cord from being damaged, pay attention to the following.
• Do not pull the cord with a jerk.
• Do not bend the cord excessively.
• Do not heat the cord.
• Do not place heavy objects on the cord.
• Do not rewire the cord.
If the power cord is damaged, contact your dealer.
■ Do not disassemble or modify the printer.
The printer has both hot and high voltage parts on the inside. To prevent an electric shock or
printer malfunction, do not attempt to disassemble or modify the printer. For service or repair,
contact your dealer.
■ Do not place liquids on the printer.
Should any liquid seep into the printer, it may result in fire or electric shock.