Olympus P-400 - Manual (Page 8)

3
US
WARNING
■ Do not place heavy objects on the printer.
Doing so may deform the printer cabinet, resulting in fire or electric shock. If the printer falls
out of place or is dropped, it may be damaged.
■ Do not install the printer in the following places.
To prevent fire, electric shock, and printer malfunction do not install the printer in the
following places.
• Dusty, humid, or oily places
Should any dust or liquid get into the printer, it may result in fire or electric shock.
• Extremely hot places
Do not expose the printer to direct sunlight or extremely high temperature such as near a
heater. Doing so may deform the printer cabinet, resulting in fire or electric shock.
Use the printer at the ambient temperature of 41 to 95 °F (5 to 35 °C) and humidity of 30 to
85 %.
■ Do not use the printer with a power supply other than that specified.
Incorrect voltage may damage printer parts, possibly resulting in fire or electric shock.
■ Connect the power cord correctly.
For example, if the power cord is plugged in loosely, it may cause a fire or electric shock.
Push the plug all the way into the outlet.
■ Make sure that excessive dust and foreign matter do not accumulate on the
power cord.
Dust and foreign matter conduct electricity, which can cause fire and electric shock. If
excessive dust and foreign matter accumulate on the cord, unplug the cord and clean it.
■ Immediately unplug the power cord when an electric storm starts outside.
The induced electricity from storms may cause fire, electric shock, or printer malfunction.
■ Do not overload the power outlet.
This printer should be plugged into a separate 120 V AC, 50/60 Hz circuit. If the printer is on
a circuit with other appliances, an overload may cause fire or electric shock.