Onkyo TX-SR603X - Manual (Page 15)

15
Remote Controller —Continued
For detailed information, see the pages in parentheses.
A STANDBY button (37)
This button is used to set the AV receiver to
Standby.
B ON button (37)
This button is used to turn on the AV receiver.
C INPUT SELECTOR buttons (51)
These buttons are used to select the input sources.
D MULTI CH button (65)
This button is used to select the multichannel DVD
input.
E DIMMER button (52)
This button is used to adjust the display brightness.
F Arrow [ ]/[ ]/[ ]/[ ] & ENTER buttons
These buttons are used to select and adjust settings.
G CH +/– button (59)
This button is used to select radio presets.
H RETURN button
This button is used to return to the previous display
when changing settings.
I DISPLAY button (53, 54)
This button is used to display various information
about the currently selected input source.
J LISTENING MODE buttons (60)
These buttons are used to select the listening modes.
The [STEREO], [SURR], and LISTENING MODE
[
]/[ ] buttons can be used regardless of the cur-
rently selected remote controller mode.
STEREO button
This button selects the Stereo listening mode.
SURR button
This button selects the Dolby and DTS listening
modes.
LISTENING MODE [ ]/[ ] buttons
These buttons are used to select the listening modes.
DIRECT button
This button selects the Direct listening mode.
ALL ST button
This button selects the All Channel Stereo listening
mode.
K TEST TONE, CH SEL, LEVEL- & LEVEL+
buttons (48)
These buttons are used to adjust the level of each
speaker.
L MACRO buttons (82)
These buttons are used with the Macro function.
M REMOTE MODE buttons (14)
These buttons are used to select the remote control-
ler modes. When you press a button on the remote
controller, the REMOTE MODE button for the cur-
rently selected mode lights up.
N SLEEP button (52)
This button is used to set the Sleep function.
O MENU button (56)
This button is used to select the search mode for
XM Satellite Radio.
P VOL [ ]/[ ] button (51)
This button can be used to adjust the volume of the
AV receiver regardless of the currently selected
remote controller mode.
Q SETUP button
This button is used to access various settings.
R MUTING button (52)
This button is used to mute the AV receiver.
S CINE FLTR button (64)
This button is used to set the CinemaFILTER func-
tion.
T L NIGHT button (64)
This button is used to set the Late Night function.
■
TAPE mode
For twin cassette decks, only Deck B can be controlled.
1 Previous & Next [ ]/[ ] buttons
The Previous [ ] button is used to select the pre-
vious track. During playback it selects the begin-
ning of the current track. The Next [
] button is
used to select the next track.
Depending on how it was recorded, the Previous
and Next [
]/[ ] buttons may not work prop-
erly with some cassette tapes.
Play [ ] button
This button is used to start playback.
Rewind & FF [ ]/[ ] buttons
The Rewind [ ] button is used to start rewind.
The FF [ ] button is used to start fast forward.
Reverse Play [ ] button
This button is used to start reverse playback.
Stop [ ] button
This button is used to stop playback.
REC [ ] button
This button is used to start recording.
2 Eject [ ] button
This button is used to eject the cassette tape.