Oki C3400 User Manual
Page 22
Network User’s Guide for C3400n and C3530 MFP
Windows - 22
4.
Select Local Printer, clear the “Automatically detect my printer” check
box. Click Next.
5.
Select “Create a new port” and, under “Type of Port:”, select “Standard
TCP/IP Port”.
6.
Click Next.
7.
The “Add Standard TCP/IP Printer Port Wizard” is displayed. Click
Next.
8.
Click Next.
9.
Under “Name or address of server providing LPD”, enter the host
name or IP address of your printer, for example, ‘192.168.1.31’. If the
above IP address is entered, the Port Name will default to
IP_192.168.1.31.
10.
Click Next. A message is displayed indicating that additional port
information will be required.
11.
Under “Device Type”, select Custom and click Settings.
12.
Depending on whether you are installing the Windows Standard TCP/
IP Port using LPR or Port 9100, enter the following details:
LPR
>
Ensure “Protocol” is set to LPR.
>
Under “Name of printer or print queue on that server” type ‘lp’.
Port 9100:
>
Ensure “Protocol” is set to Raw.
>
Ensure that the “Port Number” is 9100 and that “SNMP Status
Enabled” is not selected.
13.
Click OK.
14.
Click Finish and follow the instructions on the screen to finish
installing the printer.