Onkyo A-9555 - Manual (Page 9)

9
Remote Controller—Continued
J REPEAT button
This button is used to set the repeat playback func-
tions on a CD, MD, or HDD component. On a cas-
sette deck, the button is used to switch the repeat
playback mode (single side only/both sides).
K PLAYLIST [ ]/[ ] buttons
Selects a playlist stored on the player on an HDD
component.
L ALBUM [ ]/[ ] buttons
Selects an album stored on the player on an HDD
component.
M PLAY MODE button
This button sets the playback mode on an MD com-
ponent.
N GROUP/SEARCH button
This button selects groups on an MD component.
On a CD player, it is used to search and select a
track number.
O MEMORY button
This button is used to set the memory playback
function on a CD or MD component. With memory
playback, you can make a custom program.
P ENTER button
This button is used to confirm the settings on a CD
or MD component.
Q CLR button
This button is used to remove the last track from the
memory function program, etc., on a CD or MD
component.
R INPUT [ ]/[ ] buttons (15)
These buttons are used to select from the following
input sources: LINE, HDD, PHONO, CD, TUNER,
TAPE or MD.
S DISPLAY button
This button is used to change the information dis-
played on a CD or MD component. When the input
source is “HDD,” this button turns on the display
backlight on the HDD component.
T MUTING button (15)
This button is used to mute the A-9755/A-9555.
U Previous and Next [ ]/[ ] buttons
These buttons are used to select the previous or next
track on a CD, MD, or HDD component. Pressing
them repeatedly selects earlier or later tracks. On a
cassette deck, they’re used for rewind and fast for-
ward.
V SCROLL button
This button is used to scroll text displayed on an
MD component. When the input source is “HDD,”
this button turns on the display backlight on the
HDD component.
W MENU, SELECT, [ ]/[ ] buttons
MENU button: Displays the HDD component
menu.
SELECT button: Confirms the option on the HDD
component menu.
[
]/[ ] buttons: Selects the option on the HDD
component menu.
Point the remote controller toward the remote control
sensor.
Notes:
• The remote controller may not work reliably if the
A-9755/A-9555 is subjected to bright light, such as
direct sunlight or inverter-type fluorescent lights.
Keep this in mind when installing.
• If another remote controller of the same type is used
in the same room, or the A-9755/A-9555 is installed
close to equipment that uses infrared rays, the remote
controller may not work reliably.
• Don’t put anything, such as a book, on the remote con-
troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.
• The remote controller may not work reliably if the
A-9755/A-9555 is installed in a rack behind colored
glass doors. Keep this in mind when installing.
• The remote controller will not work if there’s an
obstacle between it and the A-9755/A-9555’s remote
control sensor.
Using the Remote Controller
Remote control sensor
About 5 m
(16 feet)