Osburn Stoves by SB I HYBRID 35 - Manual (Page 31)

31
WARNING CODES
MESSAGE CORRESPONDING WARNING
Pressure switch error.
L-250 automatic high temperature switches, located under and above the auger.
L-250 manual reset high temperature switch, located beside convection blower.
Hopper is empty
Lighting error.
Hopper lid stayed open more than 3 minutes.
Inverted polarity in power outlet.(Will not keep the stove from operating)
Power outage
Igniter fuse blew up
SMOKE SMELL OR SOOT BUILD-UP
Because it is a wood-burning device, your HYBRID-35 may emit a faint wood-burning odor. If this increases beyond normal, or if you notice an unusual
soot build-up on walls or furniture, check your exhaust system carefully for leaks. All joints should be properly sealed. Also clean your stove, following
instructions in “MAINTENANCE”. If problem persists, contact your dealer.