Recording, 8recording – Onkyo 144 User Manual

Page 8

Advertising
background image

8

1

Recording

Confirm that the amplifier is set up
correctly for recording. (Refer to the
amplifier’s instruction manual for details.)
1. Insert the cassettes.

Make sure the side to be recorded is
facing outward.

Recording is not possible on the tape
leaders (the transparent sections you
see at both ends of the tape.)

2. Prepare the source component to be

used for the recording.

• Tune in the desired station on the tuner.
• Load a CD (or LP) into the CD player

(or turntable).

• Load a cassette into the tape player

(analog or DAT).

3. Set the Dolby NR by pressing the

DOLBY NR button repeatedly until
the desired Dolby NR indicator
(OFF, B or C) turns on.

4. Set the Reverse Mode by pressing the

REVERSE MODE button repeatedly
until the desired mode is displayed.
(

v

) one side: Only one side of the

tape is recorded.

(

b

) repeat: Both sides of the tape are

recorded.

5. Press the COUNTER A/B button

repeatedly until

B

is displayed, and

press the COUNTER RESET button
to return the tape counter to [0000].

6. Begin playing the source component.
7. Press the
t button.
8. While observing the peak level

indicators, adjust the recording level.

• The recording levels of the left and

right channels are adjusted simultane-
ously.

• Use the REC LEVEL knob to adjust the

recording level.

• When using metal cassettes, the REC

LEVEL knob should be adjusted so that
+3 dB indicators light periodically.
When using other kinds of tapes, the 0
dB indicator should light periodically.
(See “Making good sound recordings”
on page 9.)

2

3

5

s

4

6

7

DECK-B

PLAY

B

REC

PAUSE

DECK-B

PLAY

B

8

Recording

Recording can be performed on Deck B only. High-speed recording is not possible when recording from the LINE IN (REC) jacks.

• Check to see if one or both of the cassette’s erasure prevention tabs have been removed. (Refer to page 13 for details)
• Confirm that the cassette deck is properly connected to the amplifier.
• Illustrations enclosed in solid boxes

indicate source component operations.

3 4

7

5

1

8

9

ONKYO

DOLBY NR

REVERSE MODE

COUNTER

RESET

A/B

REC LEVEL

MIN

MAX

L

R

dB

-20

-

-10

-6

-3

+3

0

+6

t

Advertising
This manual is related to the following products: