Oregon WRB308 - Manual (Page 12)

EN
12
The unit has lost contact with the
remote sensor but the time is
synchronized
The unit has lost contact with the
remote sensor and the time is not
synchronized
The unit cannot reach the remote
sensor
NOTE To force a manual search for atomic clock
reception, press and hold SEARCH on the sensor for 2
seconds.
TIME ZONES
When the main unit receives an atomic clock signal (via
the sensor) for the first time, or when you force a manual
search for the atomic clock reception, the time will
automatically be set to Pacific time. To change to another
time zone (M - Mountain, C - Central or E- Eastern)
simply
1. Press and hold MODE for 2 seconds.
2. Press or to change the setting.
3. Press to confirm and exit setting mode.
TURN ATOMIC CLOCK ON / OFF
If you wish to manually set the clock, you must first
disable the atomic clock feature. To do this, press and
hold on the weather station for 2 seconds. To enable
it, press and hold for 2 seconds. This icon ,
will only appear on the display when the atomic clock is
enabled.
SET CLOCK
You only need to do this if you have disabled the atomic
clock, or if you are too far from the atomic clock signal.
1. Press and hold MODE for 2 seconds.
2. Press or to change the setting. (Press and
hold to scroll quickly through the options.)
3. Press MODE to confirm and move onto the next
one.
4. The settings will appear in the following order:
Time zone, 12 / 24 hour format, hour, minute,
year, month / day format, month, date, and
display language.
NOTE The time zones available are P (Pacific), M
(Mountain), C (Central) and E (Eastern).
NOTE The language options are E (English), F (French)
and S (Spanish). The language you select determines
the weekday display.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds,
WRB308 M_EN_V6.P65 2005.5.30, 9:49 12