Oreck Super Air 5 447628 - Manual (Page 12)

12
Troubleshooting Guide
6 If the cell is arcing, check the following:
a. If there are loose or broken ionizer wires.
b. If the cell is dirty. Remove the cell and wash with warm soapy water. Dry completely
before re-installing.
c. If there are bent cell plates.
d. If the cell is improperly installed in the unit.
e. If the cell contacts are broken or loose.
Replace the cell by following
instructions on inside of
cabinet top.
Reinstall the cell.
Replace the cell.
CELL CONTACTS
Replace the cell.