Onkyo DR-815 - Manual (Page 13)

13
Part Names and Functions —Continued
The page numbers in parentheses show where you can find the main explanation for each item.
A TAPE/HDD IN/OUT (21)
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.). If you want to connect
Onkyo RI Dock, connect the RI Dock output with
the TAPE/HDD IN terminal.
B LINE/TV IN (22)
These terminals are for connecting audio output of
external devices such as TV, DVD or turntable with
a built-in phono equalizer.
C FM ANTENNA (16, 17)
This jack is for connecting an FM antenna.
D AM ANTENNA (16,17)
These push terminals are for connecting an AM
antenna.
E FRONT SPEAKERS (18)
These terminals are for connecting speakers.
F AV CONNECTOR (20)
This SCART output can be connected to a TV or
projector with a SCART input. This SCART con-
nector outputs composite video, S Video, and RGB
video.
G VIDEO OUT VIDEO (20)
This RCA connector can be used to connect a TV or
projector with a composite video input.
H VIDEO OUT S VIDEO OUT (20)
This connector can be used to connect a TV or pro-
jector with an S Video input.
I PRE OUT (22, 23)
These terminals are for connecting a power ampli-
fier.
J SUBWOOFER CONTROL
This terminal is provided for future use with Onkyo
subwoofer equipped with SUBWOOFER CON-
TROL terminals.
No product is available as of July 2006.
K REMOTE CONTROL (21)
This (Remote Interactive) jack can be con-
nected to an jack on another Onkyo AV compo-
nent. The DVD receiver’s remote controller can
then be used to control that component. To use
,
you must make an analog audio connection (RCA)
between the DVD receiver and the other AV compo-
nent.
Rear Panel
1 B D
6
5
K J
G
8
9
3
See pages 16-23 for connection information.