Onkyo DR-815 - Manual (Page 28)

28
Customizing the Source Names
You can change the source name that appears in the display to suit any component you connected per the instruc-
tions on pages 21-22.
About short source names
The short source names appear in the display depending
on the situation. Check the short names in the table
below.
Note:
Pages 76 and 77 offer a list of the remote controller but-
tons you can use after you have changed the source
names.
1 Press INPUT / until the source
whose name you wish to change
appears in the display.
You can select TAPE or LINE.
2 Press EDIT/NO/CLEAR repeatedly
until “Name Select?” appears in
the display.
3 Press MULTI JOG.
4 Turn MULTI JOG to select a new
name for the source.
Depending on the source you’ve selected
in step
1 , the name changes in the follow-
ing order:
1
2
3-5
Display
LINE
GAME
TV
PC
*1
TAPE HDD CD-R
*1 Select this if you connected an
Onkyo USB component that sup-
ports
connection.
5 Press MULTI JOG to enter the new
name.
“Complete” appears in the display. You
may press YES/MODE instead of
MULTI JOG to get the same result.
Ordinary names Short names
CD-R CR
GAME GM
HDD HD
LINE LI
PC PC
TAPE TA
TV TV