Oki C 6000n - Manual (Page 52)

C6000n User’s Guide
52
Auto Switching ____________________
General Information
If a paper tray (Tray 1) runs out of paper, your printer can
automatically switch to another paper tray (MP Tray, optional
Tray 2) loaded with the same type of paper. This is called Auto
Switching.
This feature is enabled either through the printer menu or the
printer driver.
Application settings override driver settings.
Driver settings override printer menu settings.
For more information,
Printer Menu: see page 53
Windows, PostScript: see page 54
Windows, PCL: see page 55
NOTE
When a paper tray runs out of paper, the printer
automatically switches to the next available paper tray
when
• more than one paper tray is installed
and
• AUTO TRAY SWITCH is set to ON.
This setting is in the Tray Configuration Sub Menu
of the top level menu Menus.
Refer to “Printer Menu” on page 53.
If you use the Multi-Purpose (MP) Tray, you must set a
paper size for the MP Tray through the control panel.
See “Changing Settings” on page 97.
In the menu, if “Media Type” is set to anything other
than “Regular Paper”, you must select a specific “Tray”.
You cannot use Automatic Selection.