Operation – Oricom UHF050 User Manual
Page 14
Operation
14
The Repeater Access function can be set (from channel 1 to 8) used by local
repeater stations. When activated, your radio will receive the Repeater on its
specific channel (all repeater outputs are on channel 1 to 8) but transmits to
the repeater channel 31 through 38.
e.g.
CH01 on Duplex mode will receive on CH01 but transmit on CH31
CH02 on Duplex mode will receive on CH01 but transmit on CH32.
CH and Number
Simplex mode Transmit/
reciever Frequency (MHz)
Duplex Mode transmit
Frequency(MHz)
1
476.425
477.175 CH31
2
476.450
477.200 CH32
3
476.475
477.225 CH33
4
476.500
477.250 CH34
5
476.525
477.275 CH35
6
476.550
477.300 CH36
7
476.575
477.325 CH37
8
476.600
477.350 CH38
To Turn Duplex (DPX) ON
1. Press and hold the DPX button for 2 seconds,
DPX
will appear on the
LCD display.
To Turn Duplex (DPX) OFF
1. Press and hold the DPX button for 2 seconds, the
DPX
will disappear
from the LCD display.
NOTE: For an up to date list of repeaters you can visit:
http://www.acma.gov.au