Oricom UHF050 - Manual (Page 9)

9
Installation of your Oricom UHF050
DC Power
The UHF050 is designed for 13.8V DC negative earth installations only.
1. Connect the negative (Black) DC power lead to the vehicle chassis or
directly to the vehicle battery negative terminal if preferred.
2. Connect the positive (Red) DC power lead via the in line fuse to a
suitable point in the vehicle fuse box or directly to the positive battery
terminal. When selecting a suitable point take into consideration if you
want your UHF 050 to be operational when the car ignition is off.
DIN Kit
The UHF050 can be installed using a optional DIN Kit - Part number; DIN050
for mounting in a vehicle dash board.
Optional External Speaker
Depending on the installation it may be necessary to use an external
speaker (not supplied) to give improved volume and clarity. This can be
plugged into the EXT –SPK socket on the rear of the unit.