Oki C3600 - Manual (Page 12)

Network User’s Guide
12
Network Configuration using
AdminManager
AdminManager Quick Setup
The AdminManager Quick Setup utility allows you to configure
the network interface easily and simply without installing any
software packages.
You can configure the following:
• Enable/disable TCP/IP, NetWare, EtherTalk, and NetBEUI
protocols.
• Set IP address, Subnet Mask and Gateway for TCP/IP
manually or by using DHCP.
• Set NetWare mode and create Queue/Print Server/Printer
objects.
• Set the Zone name and Port name for EtherTalk.
Configuration requires a PC with Windows XP or Vista
operating system, running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to
the network with TCP/IP or IPX/SPX.
This utility must be used on a PC that is located on the same
segment as the printer.
NOTE
Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.