Oki C5100 58357102 - Manual (Page 5)

5
Network Install: Software
TCP/IP
Note: Installing a printer on a network is best handled by
someone familiar with networks (such as a network
Administrator).
For more detailed information, see the OkiLAN
User’s Guide on the Publications CD supplied with
your printer.
Install the Driver
Note: If you are not using DHCP, you need to obtain an IP
Address from your network Administrator and enter
it using the front panel:
• Press + until you see NETWORK MENU on the
display, then press ENTER.
• Press + until you see IP ADDRESS SET on the
display, then press ENTER.
• Press + to change the setting to MANUAL , and press
ENTER, then BACK.
• Press + to advance to the IP ADDRESS display, then
press ENTER.
• Use the + and – to set each set of three digits in the
IP Address, pressing ENTER in between to go to the
next set of digits.
• Press BACK to engage the IP Address, then press
ON LINE.
□ Insert the Drivers CD supplied with your printer in the
CD-ROM drive. The CD will autorun. (If it doesn’t,
click Start
→ Run → Browse. Browse to your
CD-ROM drive, double-click Install.exe, click OK.)
□ The License Agreement appears, click Next.
□ The Menu Installer Software Installation window
appears. Select your language.
□ Click the Printer Driver Installer button.
□ The Local or network printer screen appears. Select
Network Printer, then click Next.
□ The Connection type screen appears. Select Directly to
the network ... and click Next.
□ The TCP/IP Connection screen appears.
□ Follow the on-screen instructions to complete the
installation.
Note: In Windows XP, if the Windows Logo testing dialog
appears, click Continue Anyway—this driver is
Microsoft certified.
Network Client Distribution
To install the software on a network for network clients, the
software must be installed on all clients’ workstations. The
Network Installer utility automatically notifies client users
by email when a new printer is added to the network.
1. Install the Network Installer Utility:
□ In the Menu Installer, click the Network Software
button.
□ Click the Administration Tools button.
□ Click the Network Installer button and follow the
on-screen instructions
2. Set up existing server email accounts in Network
Installer.
3. Install the printer drivers:
□ Install the printer on the network as a shared printer.
The client drivers for the printer are automatically
copied as well.
□ Register the printer in Network Installer.
When the printer has been registered, Network Installer
sends an email to clients added to Network Installer
informing them that the printer is available on the network.
Each client can install the appropriate driver as follows:
• Windows 2000, XP, and NT 4.0 clients can install drivers
by opening the connectme.exe attachment to the email.
• Windows Me, 98, and 95 clients can install the drivers by
launching the Add Printer Wizard and following the
network administrator’s instructions for locating the
appropriate driver.