Oki C5100 58357102 - Manual (Page 6)

6
Network Install: Software
TCP/IP (cont.)
Configuring the Print Server via
the Embedded Web Page
Note: For more detailed information, see the OkiLAN
User’s Guide on the Publications CD supplied with
your printer.
□ Activate your web browser (Netscape Navigator ®
version 4.0 or higher, or Microsoft ® Internet Explorer ®
version 4.0 or higher), then enter the IP Address for the
printer (this will be found on the Network Information
configuration sheets generated when you press the Test
button on the back of the printer).
□ From this page you can
• Enable /disable protocols.
• Change the IP address, Subnet Mask and
default Gateway to meet the requirements for
your particular network environment.
□ When done, save and submit your changes to the print
server to make them permanent. When prompted, enter
the following:
• User Name = Root.
• Password = Last 6 digits of the MAC Address
(this will be found on the Network
Information configuration sheets generated
when you press the Test button on the back of
the printer).
Activating the Duplex Unit and
Second Paper Tray Options
If your printer has an optional duplex unit or second paper
tray installed, you must enter the driver and activate them.
□ Click Start
→ Settings → Printer.
□ Right click the printer icon.
Windows 2000, XP and NT 4.0:
□ Click Properties
□ Click the Device Settings tab.
□ Scroll down to Installable Options.
□ Click Duplex, then click Installed. Do the same
thing for Hard Disk. If you have the optional
second paper tray installed, click Available Tray
and select 2.
Windows Me, 98 and 95:
□ Click Printer Properties.
□ Click the Device Options tab.
□ Select Duplex Option Unit, Printer Hard Disk,
and select optional paper trays if installed.
□ Click OK, then close the Printers dialog box.