Olympus P-10 - Manual (Page 27)

27
Preparation
Printing
For Your Information
Introduction
ENGLISH
If indicators light steadily and blink
* When communication is successfully established, the light turns off.
Indicator
Lamp
status
Printer status Necessary countermeasure Page
POWER On Power ON
— 14
Off Power OFF
ACCESS On * Connecting to
digital camera Do not disconnect the digital
camera or PC.
—
Blinking
slowly Communi-
cating
Blinking
very
slowly Printing
— —
PAPER Blinking
slowly Out of paper Remove the paper tray, refill
paper in the tray, and replace
the tray in the printer. 18,26
The paper
and ink
ribbon
cartridge are
incompatible When printing on 4×6 paper, be
sure to use an ink ribbon
cartridge for 4×6 printing. When
printing on 3.5"×5" paper, use
an ink ribbon cartridge for
3.5"×5" printing.
17
RIBBON Blinking
rapidly End of ink
ribbon Replace the ink ribbon cartridge
with a new one.
15,26
Blinking
slowly Ink ribbon
cartridge not
installed Install an ink ribbon cartridge on
the printer.
15
The paper
and ink
ribbon
cartridge are
incompatible When printing on 4×6 paper, be
sure to use an ink ribbon
cartridge for 4×6 printing. When
printing on 3.5"×5" paper, use
an ink ribbon cartridge for
3.5"×5" printing.
17
ACCESS, PAPER Blinking
simulta-
neously
Paper jam Remove jammed paper.
29
ACCESS,
RIBBON Blinking
simulta-
neously Communi-
cation error Ensure that the digital camera is
PictBridge compatible.
—
Turn the printer off and ON,
then retry printing.
If the error persists, consult your
nearest OLYMPUS service
center.
—
ACCESS,
RIBBON,
PAPER Blinking
simulta-
neously Internal
problem Consult your nearest
OLYMPUS service center.
—
p10_e_000_bookfile.book Page 27 Monday, December 15, 2003 11:51 AM