Olympus P-10 - Manual (Page 7)

7
Safety precautions
Preparation
Printing
For Your Information
Introduction
ENGLISH
J Do not use the printer in the following places
Unstable or inclined surfaces.
Outdoors (particularly on beaches, etc.), or places that expose
the printer to excessive dust or debris.
Places subject to rain, dripping, or enclosed places where
condensation could occur such as inside a plastic bag.
J Do not use the printer with an AC adapter or power cord other
than that specified/provided
J Do not use the provided AC adapter or power cord with any
other devices
J Provide correct voltage
Incorrect voltage may damage printer parts.
Use with incorrect voltage may cause fire or electric shock.
J Connect the power cord correctly/safely
For example, if the power cord is plugged in loosely, it may cause a
fire or electric shock.
Push the plug all the way into the outlet.
J Make sure that excessive dust and debris do not accumulate
on the power cord
Dust and debris may conduct electricity, which can cause fire and
electric shock.
If excessive dust and debris accumulate on the cord, unplug the
cord and clean it.
J Always unplug the power cord during an electrical storm
The induced electricity from storms may cause fire, electric shock,
or printer malfunction.
J Do not hold the power cord plug with wet hands
Doing so may result in electric shock.
Be sure your hands are dry before handling.
J Plug the printer directly into an outlet
Avoid plugging into a socket that is already being used by several
appliances.
p10_e_000_bookfile.book Page 7 Monday, December 15, 2003 11:51 AM