Orange Micro RAMPAK 4GS - Manual (Page 13)

menu, but the disk containing the RamPak Utilities file
must be in the drive in order to change settings.
How to Use Pull-down Menus
When you first enter the menu screen, you will see a
bar across the top of the screen with several titles.
These are your
menu titles. Under each of these is a
menu, which contains one or more selections. Some
selections will open a dialog box, which will provide
additional selections or allow the entry of data.
1. OPENING A MENU
Use the mouse to point at the desired menu. Then press the
mouse button (click) and hold. You will now see the
available menu selections. You may now make your
selection, as explained below.
2. MAKING SELECTIONS FROM A MENU
Still holding down the mouse button, “drag” the arrow to the
desired menu selection. Then release the button. This
procedure, combined with 1 above, is called “clicking and
dragging’. Either a selection has been made, or a dialog
box has been opened.
3. SETTINGS WITHIN A DIALOG BOX
For ON/OFF or YES/NO settings, point and click on the box
in front of the selection. For settings where data must be
entered, press the tab key and then use the keyboard to
enter the data.
4. CLOSING THE DIALOG BOX
Point and click on the “CLOSE” box or the “OK” box. This
will return you to the menu screen.
5. CLOSING THE MENU
Menu is automatically closed except when dragging to a
menu selection.
6. EXITING TO ProDOS
Use above procedure to select either Done--Install
Changes or Undo All Changes menu.
11