Orange Micro RAMPAK 4GS - Manual (Page 6)

3. Touch the power supply of the Apple IIGS before
handling the RamPak 4GS. Static charges may
damage your RAM or other delicate electronic parts.
4. If you have purchased additional RAM for the Ram
Pak, this must be installed before the RamPak is
installed in your Apple. Turn ahead to ‘Installing RAM
Chips in the RamPak 4GS on page 5, follow the
instructions, and return to step 5 below.
5. Locate the memory expansion slot. You will notice
that the IIGS contains a row of seven expansion slots,
with an eighth slot set out-of-line at the far right front
of the machine. This eighth slot is the memory
expansion slot to be used by the RamPak 4GS.
6. The Ram Pak 4GS must be installed with the sloped
end of the card nearest the front of the IIGS. (The
card is designed with a slope for users who have
upgraded from an Apple lIe, retaining their original
system enclosure). With the card so positioned,
place the ‘RamPak 4GS directly into the memory
expansion slot and press down with a firm rocking
motion. Continue until the card is firmly seated.
7. Replace the Apple IIGS cover.
8. Re-attach any disconnected power and peripherals.
4
MEMORY EXPANSION SLOT