Onkyo TX-SR606 - Manual (Page 10)

10
Getting to Know the AV Receiver —Continued
A DIGITAL IN OPTICAL 1 and 2
These optical digital audio inputs are for connecting
components with an optical digital audio output,
such as a CD player or DVD player. They’re assign-
able, which means you can assign each one to an
input selector to suit your setup. See “Digital Input
Setup” on page 44.
B DIGITAL IN COAXIAL 1 and 2
These coaxial digital audio inputs are for connect-
ing components with a coaxial digital audio output,
such as a CD player or DVD player. They’re assign-
able, which means you can assign each one to an
input selector to suit your setup. See “Digital Input
Setup” on page 44.
C COMPONENT VIDEO IN 1 and 2
These RCA component video inputs are for con-
necting components with a component video output,
such as a DVD player, DVD recorder, or DVR (dig-
ital video recorder). They’re assignable, which
means you can assign each one to an input selector
to suit your setup. See “Component Video Input
Setup” on page 44.
D COMPONENT VIDEO OUT
This RCA component video output is for connect-
ing a TV or projector with a component video input.
E HDMI IN 1–4 and OUT
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI inputs are for connecting components
with an HDMI output, such as a DVD player, DVD
recorder, or DVR (digital video recorder). They’re
assignable, which means you can assign each one to
an input selector to suit your setup. See “HDMI
Input Setup” on page 43.
The HDMI outputs are for connecting a TV or pro-
jector with an HDMI input.
F MONITOR OUT
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
G SIRIUS antenna (on North American model)
This jack is for connecting a SIRIUS digital
antenna, sold separately (see the separate SIRIUS
instructions).
H AM and FM ANTENNA
The AM push terminals are for connecting an AM
antenna. The FM jack is for connecting an FM
antenna.
I FRONT L/R, CENTER, SURR L/R, and SURR
BACK L/R SPEAKERS
These terminal posts are for connecting the front
speakers, center, surround, and surround back
speakers.
The FRONT L/R and SURR BACK L/R terminal
posts can be used with front speakers and surround
back speakers, respectively, or used to bi-amp front
Speakers. See “Bi-amping Front Speakers” on
page 17.
J REMOTE CONTROL
This (Remote Interactive) jack can be con-
nected to the jack on another -capable
Onkyo component for remote and system control.
To use , you must make an analog audio connec-
tion (RCA) between the AV receiver and the other
component, even if they are connected digitally.
Rear Panel
ZONE 2 SPEAKERS
R
L
PRE OUT ZONE 2
LINE OUT
ANTENNA
FM
AM
75
REMOTE CONTROL
COAXIAL
OPTICAL
1
(DVD)
2
(CBL/SAT)
1
(GAME/TV)
2
(CD)
DIGITAL IN
ASSIGNABLE
IN 1(DVD) IN 2
COMPONENT VIDEO
Y
C B/ P B
C R/ P R
ASSIGNABLE
HDMI
IN 1 IN 2 IN 3 IN 4
ASSIGNABLE
L
R
L
R
SURR BACK SPEAKERS SURR SPEAKERS FRONT SPEAKERS
CENTER SPEAKER
Bi-AMP for FRONT SPEAKERS
R
L
R
L
IN IN IN
IN
IN
IN
IN
IN IN
SUB
WOOFER
FRONT SURR SURR BACK CENTER
CBL/SAT GAME/TV
GAME/TV CBL/SAT
VCR/DVR
VCR/DVR
DVD TAPE CD
DVD MONITOR OUT
S
V
S
V
OUT
SIRIUS (DVD) (GAME/TV) (CBL/SAT) (VCR/DVR)
SUB WOOFER
R
L OUT
OUT
OUT
OUT
2
J K L N M O P Q R S T
3 4 5 H 1 I 6 G
North American model