Onkyo R-805X - Manual (Page 14)

14
Connecting to components other than the Separate Collection Series
Before connecting
• If your subwoofer isn’t equipped with an amplifier, connect a separate amplifier to the unit
first, then connect the subwoofer to that amplifier.
• The SUBWOOFER PRE OUT connector supplies the left and right mixed monaural signals to
the subwoofer.
Connections
You can connect a sound processor (e.g. surround processor, graphic equalizer, etc.) to the unit.
Before connecting
• Disconnect the jumper plugs using the PROCESSOR connectors.
– Please retain them for future use.
– Never connect the jumper plugs to the other connectors, as this may cause the unit to
malfunction, so that the sound is not reproduced.
– If you do not use the PROCESSOR connectors, connect two jumper plugs horizontally to
the IN and OUT jacks firmly.
Connections
1
Remove the jumper plugs.
2
Connect the sound processor to the unit.
Connecting a subwoofer (U.S. & Canadian models only)
FM STEREO/AM TUNER AMPLIFIER
(PLAY) (REC) (PLAY) (REC)
L
R
(REC) (PLAY)
OUT MD
CDR TAPE
CD IN LINE/DVD
OUT IN OUT IN
REMOTE CONTROL
L
R
L
R
L
R AM
FM 75
ANTENNA
R
L
SPEAKERS
RATING:AC120V 60Hz 61W MODEL NO. R-805X
SUBWOOFER PRE OUT
AC 120V 60Hz
SWITCHED
120W 1A MAX.
AC OUTLET
SUBWOOFER
PRE OUT
This unit (R-805X)
Subwoofer
Subwoofer
Amplifier
or
When connecting a subwoofer
with a built-in amplifier
When connecting a subwoofer
with no built-in amplifier
Audio connection cable
Audio connection cable
Connecting a sound processor (other than U.S. & Canadian models)
OUT
IN
PROCESSOR
Jumper plug
FM STEREO/AM TUNER AMPLIFIER
(PLAY) (REC) (PLAY) (REC)
OUT IN
L
R
(REC) (PLAY)
OUT MD
CDR TAPE
CD IN LINE/DVD PROCESSOR
OUT IN OUT IN
REMOTE CONTROL
L
R
L
R
L
R AM
FM 75
ANTENNA
R
L
AC OUTLET
SPEAKERS
AC230V 50Hz SWITCHED
100W MAX.
RATING:AC230V 50Hz 54W MODEL NO. R-805X
OUT IN
PROCESSOR
L
R
OUTPUT
: Signal flow
This unit (R-805X)
INPUT
Sound processor