Onkyo R-805X - Manual (Page 16)

16
Connecting speaker systems
Before connecting
• The load impedance of each speaker must be at least 4 ohms.
• Do not use unnecessarily long or extremely thin speaker cords. Otherwise, the DC resis-
tance of the speaker cords may become too high, lowering the damping factor and causing
the sound quality to deteriorate.
• Do not connect the speaker cord to the L and R connectors at the same time and do not
connect two or more speakers to the same speaker connectors.
Preparing the speaker cords for connection
Connecting the speaker cords to the speaker connectors
Connecting left and right speakers
R
L
SPEAKERS
R
L
SPEAKERS
NO
Note
To prevent dam-
age to circuits
never short-circuit
the positive (+)
and negative (–)
speaker wires.
1 Strip 15 mm from
the end of each
cord.
15mm
2 Twist the stripped
end of the cord.
R
L
SPEAKERS
FM STEREO/AM TUNER AMPLIFIER
(PLAY) (REC) (PLAY) (REC)
OUT IN
L
R
(REC) (PLAY)
OUT MD
CDR TAPE
CD IN LINE/DVD PROCESSOR
OUT IN OUT IN
REMOTE CONTROL
L
R
L
R
L
R AM
FM 75
ANTENNA
R
L
AC OUTLET
SPEAKERS
AC230V 50Hz SWITCHED
100W MAX.
RATING:AC230V 50Hz 54W MODEL NO. R-805X
-
+
-
+
Right
speaker
Left
speaker
This unit
1 Turn the knob counter-
clockwise to loosen.
2 Insert the stripped end
of the cord.
3 Turn the knob clockwise
to tighten.