Onkyo TX-SR309 - Manual (Page 17)

17
En
Turning On & Basic Operations
Turning On/Off the AV Receiver
Tip
• See “Auto Standby” about a power management setting (
➔
page 34).
Turning On
1 Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by on the remote controller.
The AV receiver comes on, the display lights.
Turning Off
1 Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by on the remote controller.
The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
ON/STANDBY
RECEIVER