Optiview DVRJ4 - Manual (Page 29)

DVRJ4
This is to set sensor input, alarm, and motion setting. This DVR supports 4channel sensor
inputs, 1 channel alarm output (relay output). And it can set motion recording on each
channel. You can record the images as it is set.
5.6. Sensor / Motion menu
Sensor / motion setting
You can use arrow buttons to adjust.
O CHANNEL SELECT:CAM 1
O ALARM ENABLE : OFF
O MOTION ENABLE : OFF
O MOTION LEVEL : VERY HIGH
O COMPARE FRAME : 02
O EVENT REC TIME : 01 MIN
O BUZZER SOUND : NO USE
O AREA SET [ ]
SENSOR SETUP
Channel selection for setting
Alarm input type selection (NO, NC, OFF)
Motion detection set
Motion detection sensitivity.
VERY HIGH is the most
sensitive.
In motion detected, how
many images you will
record? Normally people
set two frames.
In motion recording, how
long will you record the
data?
In motion detected, beep
goes off and you assign
that sound duration. If you
set „NO USE‟, there is no
beep.
Motion detection area
The part filled with yellow
color is the area that
detects motion.
User’s manual