Opticon LPN 1736 - Manual (Page 73)

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner
Suffix Options
A Prefix and/or a Suffix of up to 4 characters each can be appended to the decoded bar
code data. The prefix is transmitted before the bar code data, the suffix, after.
For units with an RS232 Interface, any of the 128 ASCII characters may be used as
Prefix or Suffix.
For units with a Keyboard Wedge Interface, special keys supported by your keyboard can
be used in the Prefix or Suffix.
A “Code Identifier: that identifies the type of symbology can also be used in the Prefix or
Suffix.
To add a Suffix
5. Scan the “Start/Stop Programming Mode” bar code to enter the programming
mode.
6. Select the symbologies to which you wish to add the Suffix.
7. Scan the Direct Input Characters that you want in the Suffix
8. Scan the “Start/Stop Programming Mode” bar code
QS
Clear All Suffixes
(PR)
Page 73