Oricom ECO80 - Manual (Page 16)

14
Caller ID
Caller ID
If you subscribe to your telephone operators service
(charges may apply), numbers of the incoming calls
will be displayed on the screen and stored in the call
log (please consult your telephone service provider for
details).
The number of the caller (or name if stored in the Phone
Book) appears in the display when the phone rings. If the
caller has withheld their phone number, a corresponding
message appears in the display. The phone number is
not displayed and will not be stored in the calls list.
A total of 30 incoming calls, with a maximum of 12
letters for the name and 23 digits for the number can be
stored in the calls list. The flashing indicates new calls
in the calls list.
Call waiting
In Australia you can use the recall button to answer a
second call while you are on the phone. However this
service will need to be turned on. For example to turn
on Telstra’s Call Waiting service:
R wait for dial tone
, 4, 3, # hear a service tone
R confirm
Take two different calls at the same time
If you have subscribed to your telephone network
operators Call Waiting Caller ID service, your phone
will display the number of the second incoming call for
around 20 seconds while you are talking on the phone.
During a call, you will hear two loud beeps periodically to
notify you of another incoming call. If you wish to answer
this call.
When the handset receives a second call, the number
of the caller appears on the display. It will display for 20
seconds or until you press a key on the phone.
R listen for dial tone
2 put the current call on hold and talk with
the second caller
R, 2 listen for dial tone and toggle between
these 2 callers