Oricom ECO80 - Manual (Page 18)

16
Using the Answering Machine (eco800 Only)
Answering Machine (eco800 Only)
Your answering machine can be ready for use within a
few seconds of plugging in the telephone line cord and
switching on the mains power.
Just follow the steps in this section to set up and use
your answering machine.
Switch on/off
Switches the answering machine on
or off. The current answer mode is
announced
Set the answer mode
Switch the answering machine on
2 sec 1. Press once to switch the answering
machine on or off
2. Press and hold for 2 second to select
"Answer & Rec" or "Answer Only"
mode
Answer and record allows callers to leave a message.
Answer only will not allow callers to leave a message.
Record your outgoing message (OGM)
Your answering machine comes with a default outgoing
message but you can record your own personal OGM of
up to 2 minutes long.
2 sec Record your message after the beep
Press to end your recording
Check your OGM
The current OGM is announced
To return to the factory pre-set OGM, just press the
key whilst the current OGM is playing.
Set the answer delay
2 sec (Under base) Enters ring delay mode and announces
the current setting.
Select between 2-9 rings or “Time
Saver”
Confirm the number or rings (2-9) or
“Time Saver”