Oki PRINTER MPS420B - Manual (Page 21)

Loading Tray 1 and Optional Tray 2 > 21
Loading Tray 1 and Optional Tray 2
1. Remove the paper tray from the bottom of the printer and place plain paper (1) in
the tray, keeping the level of the paper in the tray below the paper full guide
arrowheads shown on the paper guides (2). For loading A4 or Legal size paper, push
the lever (4) in the arrow direction and extend the paper tray using the rear paper
support (5).
Note
If you are topping off the paper in a paper tray, it is recommended that you
remove the remaining paper from the tray first, then add the new paper
stock and place the paper you removed on top. This ensures that the oldest
paper is used first to help prevent paper jams.
Note
Load letterhead paper face down and top edge towards the front of the
paper tray (3).
1
2
3
4