Onkyo TX-SR403 - Manual (Page 6)

6
Front & Rear Panels
For detailed information, see the pages in parentheses.
A STANDBY/ON button (30)
This button is used to set the AV receiver to On or
Standby.
B STANDBY indicator (30)
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
C Remote-control sensor (9)
This sensor receives control signals from the remote
controller.
D STEREO button (40)
This button is used to select the Stereo listening
mode.
E LISTENING MODE [ ]/[ ] buttons (40)
These buttons are used to select the listening modes.
F Display
See “Display” on page 7.
G DISPLAY button (35)
This button is used to display various information
about the currently selected input source.
H DIGITAL INPUT button (31)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
I DIMMER button (38)
This button is used to adjust the display brightness.
J MEMORY button (37)
This button is used when storing or deleting radio
presets.
K TUNING MODE button (36)
This button is used to select the Auto or Manual tun-
ing mode.
L Arrow/TUNING/PRESET & ENTER buttons
When the AM or FM input source is selected, the
TUNING [
] [ ] buttons are used to tune the
tuner, and the PRESET [ ] [ ] buttons are used
to select radio presets (see page 37). When the setup
menus are used, they work as arrow buttons and are
used to select and set items. The ENTER button is
also used with the setup menus.
M MASTER VOLUME control (34)
This control is used to adjust the volume of the AV
receiver to MIN, 1 through 79, or MAX
N PHONES jack (39)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
O SPEAKER A & B buttons (34)
These buttons are used to turn speaker sets A and B
on or off.
P TONE, [–] & [+] buttons (38)
These buttons are used to adjust the bass and treble.
Q Input selector buttons (34)
These buttons are used to select from the following
input sources: MULTI CH, DVD, VIDEO 1/VCR,
VIDEO 2, VIDEO 3, TAPE, TUNER, or CD.
The [MULTI CH] button selects the DVD analog
multichannel input.
R RETURN button
This button is used to return to the previously dis-
played setup menu.
S SETUP button
This button is used to access various settings.
Front Panel
TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD
MASTER VOLUME
A SPEAKERS B
1
Q N O P R S
2 3 4 5 7 8 9 J K L M 6