Onkyo HT-S590 - Manual (Page 50)

50
Advanced Setup
Speaker Distance
To get the best from surround sound, it’s important that
the sound from each speaker reaches the listener at the
same time. To achieve this, you need to specify the dis-
tance from each speaker to the listening position.
Notes:
• The Center and Subwoofer distances can be set up to
5 ft. (1.5 m) more or less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
• The Surround distances can be set up to 5 ft. (1.5 m)
more or 15 ft. (4.5 m) less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
SurrRight and Surr Left distances can be set between
5 and 25 ft. (1.5 and 7.5 m).
Advanced Speaker Settings
1 Measure and make a note of the
distance from each speaker to
the listening position.
2 Press the [RECEIVER] button fol-
lowed by the [SETUP] button on
the remote controller.
MUTING
MENU TOP MENU
SP A / B
SETUP RETURN
PLAYLIST PLAYLIST
RANDOM SUBTITLE
PLAY MODE
AUDIO REPEAT
RC- 646 S
--/---
TAPE
ON/STANDBY
DIMMER SLEEP
INPUT SELECTOR
REMOTE MODE
V 1 V 2 V 3
C D TAPE TUNER
DVD MULTI CH
LISTENING MODE
DISPLAY OR-EQ
TEST TONE CH SEL
SURROUND STEREO
CINE FLTR
LEVEL+ LEVEL-
L NIGHT
VOL
HDD
CDR
MD
DVD RECEIVER
C D
+10 0 CLR
1 2 3
4 5 6
7 8 9
ENTER
CH
DISC ALBUM
RETURN SETUP
RECEIVER
ENTER
The speaker distance setting cannot be
changed while a pair of headphones is con-
nected, speaker set B is on, or the multichan-
nel input is being used.
SETUP
RECEIVER
3 Use the Up and Down [ ]/[ ]
buttons to select “2. SP Dis-
tance,” and then press the
[ENTER] button.
4 While “Unit” is displayed, use the
Left and Right [
]/[ ] buttons to
select feet or meters .
feet: Distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.
meters: Distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.
5 Use the Down [ ] button to
select “Front,” and use the Left
and Right [
]/[ ] buttons to
specify the distance for the “front
speakers,” then press the Down
[
] button to select the next
speaker.
6 Repeat step 5 for all speakers.
Note:
Speakers that you set to No or None in
the Speaker Configuration (page 52)
cannot be selected.
7 Press the [SETUP] button.
Setup closes.
When you want to go back up one
menu level to “SP Distance,” press the
[RETURN] button.
ENTER
SETUP