Onkyo DV-SP405 - Manual (Page 41)

41
USB playback
(Not North American model)
Note:
Onkyo cannot guarantee compatibility (operation and/or
bus power) with all USB mass storage devices and
assumes no responsibility for any loss of data that may
occur when connected to this unit.
It is possible to listen to two-channel audio and watch
JPEG files using the USB interface on the front of this
unit. Connect a USB mass storage device as shown
below.
Notes:
• This includes playback of MP3/WMA/ MPEG-4
AAC/JPEG files (except files with copy-protection or
restricted playback).
• Compatible USB devices include portable flash mem-
ory (particularly keydrives) of format FAT16/32. It is
not possible to connect this unit to a personal com-
puter for USB playback.
• With large amounts of data, it may take longer for the
system to read the contents of a USB device.
• The Home Menu cannot be displayed while using the
USB mode.
• Play modes such as “Repeat”, “Random”, “Program”,
and “Search Mode” cannot be used.
Important:
If a “USB ERR” message lights in the display, it may
mean that the power requirements of the USB device are
too high for this player, or that the device is incompati-
ble. Try the following:
• Switch the player off, then on again.
• Reconnecting the USB device with the player
switched off.
• Change the player back to DVD mode (“LOADING”
will appear in the front panel display whether a disc is
inserted or not) by pressing DVD/USB, then once
again select USB mode (“USB MODE” will appear in
the front panel display).
• Using a dedicated AC adapter (supplied with the
device) for USB power.
If this doesn’t remedy the problem, it is likely your USB
device is incompatible.
Using the USB interface
1 With the player switched on, press
DVD/USB.
Make sure your TV is on and set to the
correct video input, and that “USB
MODE” is showing on the front panel
display.
2 Connect your USB device.
The USB terminal is located on the front
panel.
• Disc Navigator is automatically dis-
played.
DVD/USB
USB mass storage
device
Cursor, ENTER
3 Use the / / / (cursor) but-
tons to select a file that you want
to play, and press ENTER.
• The method of playback for files saved
on a USB device is the same as for
other discs. For more information, see
“Basic playback controls” on page 28
and “Playing discs” on page 31.
4 Turn off this player and remove the
USB device.
• The next time you turn this player on it
will start up in USB mode. To return to
DVD mode, either press DVD/USB or
press
(open/close) to open the disc
tray.
or