Omega Engineering OM88128 - Manual (Page 23)

Diagram G-1:
Sleep Mode
setting
Model OM8828/OM8829 logger (LCD display) will stop displaying on
the LCD after completed recording, i.e. The figures will be disappeared
(This should be set up from computer before recording ). Easy to
click and press the slide switch to the right for SLEEP then click OK .
You may select NON-SLEEP and press OK , then the logger will
always display current Temperature / Relative Humidity after
completed recording , but please be noted that this setting will
consume the battery power . (The software default Non-Sleep mode)
SLEEP MODE SETTING
20
Sleep Mode Setting
Ok Sleep Non-Sleep
Print out the data table to either a printer or a fax /internet application
depending on your available facilities.(See Diagram H )
Depress icon to view detailed data table,which includes 200 sample
readings.Temperature data shows the curser 1,If you are logging
model OM8829 (Temp. & Relative Humidity) , RH% reading shows
next to the temperature reading .
DATA TABLE